Druid: Single Zone Security Energizer Security Fence Energizer Single Monitored Zone Earth Monitoring Facility 2 Joules typical output energy (500 Ohms at max settings) Compliant with IEC60335-2-76 Tested for EMC Compliance Supplied with internal battery backup Technical Manuals Electronic Brochure FEATURES: Integrated monitor For energizers designed from a security perspective the fence monitoring is an integral part of the product. Power saving The energizer continuously monitors the battery condition. if the voltage drops too low it automatically conserves energy by reducing the output energy. Lightning protection The mains and high voltage outputs are protected against lightning and power surges. It also protects the unit against abnormally high potential differences between the high voltage and mains ground. Interference suppression The energizer incorporates a filter to suppress the electromagnetic noise generated inside the unit. Remote key-switch The energizer can be wired to a remote on/off switch. The connection to the remote switch can be up to 100 meters in length. Gate input One potential free contact input with built-in delay. Siren output 12 VDC output for siren Strobe light output 12 VDC output for strobe light Weatherproof housing Armed response radio connectable Battery protection Low Voltage Monitoring

Wizord 4: Single Zone Security Energizer Security Fence Energizer Single Monitored Zone Earth Monitoring Facility 3.7 Joules typical output energy (500 Ohms at max settings) Compliant with IEC60335-2-76 Tested for EMC Compliance Supplied with internal battery backup Technical Manuals CE Certificate FEATURES: Integrated monitor For energizers designed from a security perspective the fence monitoring is an integral part of the product. Power saving The energizer continuously monitors the battery condition. if the voltage drops too low it automatically conserves energy by reducing the output energy. Lightning protection The mains and high voltage outputs are protected against lightning and power surges. It also protects the unit against abnormally high potential differences between the high voltage and mains ground. Interference suppression The energizer incorporates a filter to suppress the electromagnetic noise generated inside the unit. Remote key-switch The energizer can be wired to a remote on/off switch. The connection to the remote switch can be up to 100 meters in length. Gate input One potential free contact input with built-in delay. Siren output 12 VDC output for siren Strobe light output 12 VDC output for strobe light Weatherproof housing Armed response radio connectable Battery protection

Merlin 4: Single Zone Security Energizer Security Fence Energizer Single Monitored Zone Earth Monitoring Facility 3.7 Joules typical output energy (500 Ohms at max settings) Compliant with IEC60335-2-76 Tested for EMC Compliance Supplied with internal battery backup Technical Manuals CE Certificate FEATURES: Keypads Up to 4 keypads and/or FOB's can be connected to one energizer. See instruction manual for more details. Integrated monitor For energizers designed from a security perspective the fence monitoring is an integral part of the product. Power saving The energizer continuously monitors the battery condition. if the voltage drops too low it automatically conserves energy by reducing the output energy. Lightning protection The mains and high voltage outputs are protected against lightning and power surges. It also protects the unit against abnormally high potential differences between the high voltage and mains ground. Interference suppression The energizer incorporates a filter to suppress the electromagnetic noise generated inside the unit. Remote key-switch The energizer can be wired to a remote on/off switch. The connection to the remote switch can be up to 100 meters in length. Gate input One potential free contact input with built-in delay. Siren output 12 VDC output for siren Strobe light output 12 VDC output for strobe light Weatherproof housing Armed response radio connectable

Merlin Stealth M15S: Single Zone Security Energizer Security Fence Energizer Single Monitored Zone Earth Monitoring Facility 4.8 Joules typical output energy (500 Ohms at max settings) Compliant with IEC60335-2-76 Supplied with internal battery backup Technical Manuals CE Certificate FEATURES: Integrated monitor For energizers designed from a security perspective the fence monitoring is an integral part of the product. Low voltage monitoring This enables the energizer to monitor the fence without a high voltage. The power consumption in this mode is very low and extends the battery standby time of the unit. Power saving The energizer continuously monitors the battery condition. if the voltage drops too low it automatically conserves energy by reducing the output energy. Adjustable fence voltage By using the keypad, the installer can control the output voltage of the energizer. It is adjustable from 4 kV to 9 kV. Lightning protection The mains and high voltage outputs are protected against lightning and power surges. It also protects the unit against abnormally high potential differences between the high voltage and mains ground. Remote key-switch The energizer can be wired to a remote on/off switch. The connection to the remote switch can be up to 100 meters in length. Auxiliary 12 VDC output A 12 volt DC fused output is available to supply any auxiliary equipment like a radio remote receiver. The current must not exceed 0.5 amps. Keypads Up to 4 keypads and/or FOB's can be connected to one energizer. See instruction manual for more details. Battery protection The battery is protected by an under voltage dropout relay. If the battery voltage drops below 10 volts, the load gets disconnected from the battery. The battery will only be reconnected if the charge voltage is sufficient to charge the battery. Gate input One potential free contact input with built-in delay. Siren output 12 VDC output for siren Strobe light output 12 VDC output for strobe light Weatherproof housing Armed response radio connectable

Merlin Stealth M18S: Single Zone Security Energizer Security Fence Energizer Single Monitored Zone Earth Monitoring Facility 7.6 Joules typical output energy (500 Ohms at max settings) Compliant with IEC60335-2-76 Supplied with internal battery backup Technical Manuals CE Certificate FEATURES: Integrated monitor For energizers designed from a security perspective the fence monitoring is an integral part of the product. Low voltage monitoring This enables the energizer to monitor the fence without a high voltage. The power consumption in this mode is very low and extends the battery standby time of the unit. Power saving The energizer continuously monitors the battery condition. if the voltage drops too low it automatically conserves energy by reducing the output energy. Adjustable fence voltage By using the keypad, the installer can control the output voltage of the energizer. It is adjustable from 4 kV to 9 kV. Lightning protection The mains and high voltage outputs are protected against lightning and power surges. It also protects the unit against abnormally high potential differences between the high voltage and mains ground. Remote key-switch The energizer can be wired to a remote on/off switch. The connection to the remote switch can be up to 100 meters in length. Auxiliary 12 VDC output A 12 volt DC fused output is available to supply any auxiliary equipment like a radio remote receiver. The current must not exceed 0.5 amps. Keypads Up to 4 keypads and/or FOB's can be connected to one energizer. See instruction manual for more details. Battery protection The battery is protected by an under voltage dropout relay. If the battery voltage drops below 10 volts, the load gets disconnected from the battery. The battery will only be reconnected if the charge voltage is sufficient to charge the battery. Gate input One potential free contact input with built-in delay. Siren output 12 VDC output for siren Strobe light output 12 VDC output for strobe light Weatherproof housing Armed response radio connectable

Merlin Keypad Single fence zone, single gate keypad (for Merlin 4 single zone energizer) Single fence zone, dual gate keypad (for Merlin Stealth M15S and M18S) Dual fence zone, dual gate keypad (for Merlin Stealth M25S and M28S)

Merlin Stealth M25S: Dual Zone Security Energizer Security Fence Energizer Two Monitored Zones Dual Earth Monitoring Facility 4.8 Joules typical output energy (500 Ohms at max settings) Compliant with IEC60335-2-76 Supplied with internal battery backup Technical Manuals CE Certificate FEATURES: Dual Integrated monitors For energizers designed from a security perspective the fence monitoring is an integral part of the product. Low voltage monitoring This enables the energizer to monitor the fence without a high voltage. The power consumption in this mode is very low and extends the battery standby time of the unit. Power saving The energizer continuously monitors the battery condition. if the voltage drops too low it automatically conserves energy by reducing the output energy. Adjustable fence voltage By using the keypad, the installer can control the output voltage of the energizer. It is adjustable from 4 kV to 9 kV. Lightning protection The mains and high voltage outputs are protected against lightning and power surges. It also protects the unit against abnormally high potential differences between the high voltage and mains ground. Interference suppression The energizer incorporates a filter to suppress the electromagnetic noise generated inside the unit. Remote key-switch The energizer can be wired to a remote on/off switch. The connection to the remote switch can be up to 100 meters in length. Auxiliary 12 VDC output A 12 volt DC fused output is available to supply any auxiliary equipment like a radio remote receiver. The current must not exceed 0.5 amps. Keypads Up to 4 keypads and/or FOB's can be connected to one energizer. See instruction manual for more details. Battery protection The battery is protected by an under voltage dropout relay. If the battery voltage drops below 10 volts, the load gets disconnected from the battery. The battery will only be reconnected if the charge voltage is sufficient to charge the battery. Gate input One potential free contact input with built-in delay. Siren output 12 VDC output for siren Strobe light output 12 VDC output for strobe light Weatherproof housing Armed response radio connectable

Merlin Stealth M28S: Dual Zone Security Energizer Security Fence Energizer Two Monitored Zones Dual Earth Monitoring Facility 7.6 Joules typical output energy (500 Ohms at max settings) Compliant with IEC60335-2-76 Supplied with internal battery backup Technical Manuals CE Certificate FEATURES: Dual Integrated monitors For energizers designed from a security perspective the fence monitoring is an integral part of the product. Low voltage monitoring This enables the energizer to monitor the fence without a high voltage. The power consumption in this mode is very low and extends the battery standby time of the unit. Power saving The energizer continuously monitors the battery condition. if the voltage drops too low it automatically conserves energy by reducing the output energy. Adjustable fence voltage By using the keypad, the installer can control the output voltage of the energizer. It is adjustable from 4 kV to 9 kV. Lightning protection The mains and high voltage outputs are protected against lightning and power surges. It also protects the unit against abnormally high potential differences between the high voltage and mains ground. Interference suppression The energizer incorporates a filter to suppress the electromagnetic noise generated inside the unit. Remote key-switch The energizer can be wired to a remote on/off switch. The connection to the remote switch can be up to 100 meters in length. Auxiliary 12 VDC output A 12 volt DC fused output is available to supply any auxiliary equipment like a radio remote receiver. The current must not exceed 0.5 amps. Keypads Up to 4 keypads and/or FOB's can be connected to one energizer. See instruction manual for more details. Battery protection The battery is protected by an under voltage dropout relay. If the battery voltage drops below 10 volts, the load gets disconnected from the battery. The battery will only be reconnected if the charge voltage is sufficient to charge the battery. Gate input One potential free contact input with built-in delay. Siren output 12 VDC output for siren Strobe light output 12 VDC output for strobe light Weatherproof housing Armed response radio connectable

Nemtek Security Energizers - Power Specifications at a glance

		Druid	Wizord	Merlin	Merlin Stealth Energizers
Nemtek Energizer Models		Druid	Wiz4	Mer4	M15S	M18S	M25S and Master M25S	M28S and Master M28S	M113S
Typical output energy into a 500 Ohms load on maximum setting: ** (M113S maximum energy into a 210 Ohms load)		2J ****	3.7J ****	3.7J ****	4.8J ****	7.6J ****	4.8J ****	7.6J ****	7.0J **** 12.7J into 210 Ohms
Typical voltage on an open circuit on maximum setting:		7400V	8000V	8000V	8500V	9300V	8500V	9300V	8400V
Typical voltage on a load of 500 Ohms on maximum setting:		6100V	7000V	7000V	5600V	7600V	5600V	7600V	5500V
Battery lead acid maintenance free:		7AH	7AH	7AH	7AH	7AH	7AH	7AH	7AH
Typical standby time * (with a fully charged new battery)		24 hrs	36 hrs	24 hrs	5-6 hrs	8-9 hrs	6-8 hrs	5-8 hrs	7-8 hrs
Typical power consumption, main supply on and a fully charged battery:		17VA	18VA	16VA	27VA	23VA	27VA	25VA	32VA
Typical power consumption, main supply off, running on battery supply only (during a power failure):		8W	10W	10W	17W	20W	17W	20W	20W
Typical power consumption, mains supply on, at maximum joule while charging battery (flat bettery):		19VA	24VA	24VA	33VA	47VA	36VA	47VA	53VA
Nemtek Recommended live wire length ***	Galvanised braided 1.2m:	up to 2km	up to 3km	up to 3km	up to 8km	up to 10km	up to 2x4km	up to 2x5km	up to 15km
	Galvanised solid 2.24mm:	up to 3km	up to 4km	up to 4km	up to 16km	up to 20km	up to 2x8km	up to 2x10km	up to 20km
	Stainless steel solid 1mm (304 & 316):	up to 0.5km	up to 0.6km	up to 0.6km	up to 0.7km	up to 0.8km	up to 2x0.7km	up to 2x0.8km	up to 0.8km
	Stainless steel solid and braided 1.2mm (304 & 316):	up to 0.6km	up to 0.7km	up to 0.7km	up to 0.8km	up to 1km	up to 2x0.8km	up to 2x1km	up to 1km
	Aluminium solid 1.6mm and 2.0mm:	up to 6km	up to 8km	up to 8km	up to 32km	up to 40km	up to 2x16km	up to 2x20km	up to 40km
Maximum live wire length ***	Galvanised braided 1.2mm:	4km	5km	5km	18km	25km	2x9km	2x13km	35km
	Galvanised solid 2.24mm:	6km	10km	10km	35km	50km	2x17km	2x25km	50km
	Stainless steel solid 1mm (304 & 316):	0.6km	0.9km	0.9km	1km	1.2km	2x1km	2x1.2km	1.2km
	Stainless steel solid and braided 1.2mm (304 & 316):	0.7km	1km	1km	1.1km	1.3km	2x1.1km	2x1.3km	1.3km
	Aluminium solid 1.6mm and 2.0mm:	12km	16km	16km	60km	80km	2x30km	2x40km	80km
Weight incl. battery weight:		5.9 kg	5.9 kg	6.1 kg	7.7 kg	7.7 kg	7.7 kg	7.7 kg	7.7 kg
Dimensions Length:		275mm	275mm	275mm	365mm	365mm	365mm	365mm	365mm
Dimensions Breadth:		205mm	205mm	205mm	235mm	235mm	235mm	235mm	235mm
Dimensions Height:		110mm	110mm	110mm	140mm	140mm	140mm	140mm	140mm