FEATURES:
Integrated monitor
For energizers designed from a security perspective the fence monitoring is an integral part of the product.
Low voltage monitoring
This enables the energizer to monitor the fence without a high voltage. The power consumption in this mode is very low and extends the battery standby time of the unit.
Power saving
The energizer continuously monitors the battery condition. if the voltage drops too low it automatically conserves energy by reducing the output energy.
Adjustable fence voltage
By using the keypad, the installer can control the output voltage of the energizer. It is adjustable from 4 kV to 9 kV.
Lightning protection
The mains and high voltage outputs are protected against lightning and power surges. It also protects the unit against abnormally high potential differences between the high voltage and mains ground.
Remote key-switch
The energizer can be wired to a remote on/off switch. The connection to the remote switch can be up to 100 meters in length.
|
Auxiliary 12 VDC output
A 12 volt DC fused output is available to supply any auxiliary equipment like a radio remote receiver. The current must not exceed 0.5 amps.
Keypads
Up to 4 keypads and/or FOB's can be connected to one energizer. See instruction manual for more details.
Battery protection
The battery is protected by an under voltage dropout relay. If the battery voltage drops below 10 volts, the load gets disconnected from the battery. The battery will only be reconnected if the charge voltage is sufficient to charge the battery.
Gate input
One potential free contact input with built-in delay.
Siren output
12 VDC output for siren
Strobe light output
12 VDC output for strobe light
Weatherproof housing
Armed response radio connectable
|
